How to Vacuum & Purge Refrigerant Lines

Home coolant systems need to be purged and vacuumed to remove any moisture and keep the system operating properly. To keep the oil in the system from turning to sludge, all moisture and any contaminated refrigerant or coolant needs to be removed annually. Moisture can also increase the occurrence of corrosion, which can ruin the system over time. Another problem is a "freeze up," where the moisture forms ice crystals on the inside of the system.

How to Convert a Container Size to Gallons

Around the world, sizes of containers are measured by volume. However volume readings are either done according to the metric or imperial measurement system. The main volume unit in the metric system is liters, with the main volume unit in the imperial system being gallons. Different countries use different measuring systems for liquid containers. Converting to gallons from other units requires a formula worked out from the equivalent volumes, which you can use to make the calculation.

How to Cut a Stainless Steel Sink

Stainless steel is a hard material to cut with standard power saws that use toothed saw blades. When you cut into the stainless steel, heat builds up quickly where the saw blade and the surface of the stainless steel meet. This heat quickly builds up beyond the melting point of the hardened steel cutting blade. Switching to an abrasive blade will eliminate the problems associated with the teeth melting off the saw blade.

How to Install a Fan on an Alumawood Patio

Alumawood patios have posts and covers made from a substance that features aluminum construction and wood grain patterns. Alumawood patios provide shade and protection from the elements, enhancing your outdoor space. A ceiling fan decorates a patio while cooling the space. They can also serve as mounting sites for ceiling fans, which will make you patio even more comfortable on warm days. However, to install a fan on an Alumawood patio you'll need to order a special fan beam at the time of installation and hire an electrician to wire the patio cover before installing the fan yourself.

How to Make a West Facing Room Brighter

A west facing room only receives light in the latter part of the day, making it significantly darker for the majority of the day than an east or south facing room. Unfortunately, short of moving house, there is nothing that can be done about the direction a room faces. West facing rooms receive limited light for most of the day. There are, however, plenty of quick and easy tricks to bounce light around the room and make a west facing room seem lighter, even when the sun is on the other side of the house.

How to Make Concrete Fountain Molds

Concrete fountains are popular additions to gardens, decks and patios. These fountains are produced by pouring specially prepared concrete into a series of molds, which are typically made from latex rubber, silicone or acrylonitrile butadiene styrene (ABS). You can reproduce ornate fountains by making concrete molds from them. With some patience and the right materials, you can turn out your own fountains by making molds of fountains you particularly admire.

How to Paint Thermoplastic Polyolefin

Thermoplastic polyolefin is a polymer used to coat low-slope or flat roofing, especially in commercial properties. It gives roof surfaces a weather-resistant coating that looks and feels much like rubber. While the rubbery coating is durable, it isn't the most stylish feature for a property. A paint roller provides quicker coverage than a brush. You can give thermoplastic polyolefin surfaces a facelift with a coat of paint but you'll need the right kind of paint.

How to Tamp a Fence Post

The best way to secure a fence post into the ground is by filling the hole around the post with cement. However, if you choose, you can fill the hole around the post with dirt and tamp it down. Tamping is the act of compacting the dirt with a tamper. If compacted hard enough, the dirt takes place of the cement and holds the post in a vertical position.

Parts of an Ironing Board

Table of Contents Cover Padding Face Legs and Mechanical Latches Extras Variations Ironing boards have been around for many years. They came into usage back when irons were cast iron and heated in the coals of a fireplace. The first ironing boards were wooden, according to Made How, and were set up on four wooden legs.

What Is a Narrow Kerf Chainsaw Chain?

When you live in the country or any other rural or rustic setting, one tool you cannot do without is a chainsaw. Besides using it to cut wood for your fireplace, you need a chainsaw to cut away brush or cut up limbs that fall to the ground during summer or winter storms. Chainsaws with narrow kerfs are usually those that have light duty and are rarely used in a country setting, as the difference between a standard chain and a narrow kerf chain consists of width and application.