How to Build a Gate With PVC Pipes

Make gate hinges by gluing two sections of 1" PVC pipe together. Repeat for a second two sections.
Slide hinges into one four-foot section of PVC pipe.

Insert each end of the four-foot sections of 3/4" PVC pipe into the 90 degree pipe joints. Insert three-foot sections into the other end of the 90 degree joints to form the gate frame. Mark the ends of each pipe around the joints with a sharpie marker. Pull all joints apart. Sand the ends and glue them before reassembling. Let glue dry.

Lay the chicken wire inside the gate frame and wire it into place by winding the jacketed copper wire around the pipe and chicken wire.

Drive 2 pieces of the one-inch PVC pipe 3/4 of the way into the ground with the rubber mallet. This will be where you want your gate supports to stand.

Insert the six-foot lengths of 3/4" pipe into the one-inch pipe that you have driven into the ground.

Hang the gate by sliding hinges over one of the six-foot sections of 3/4" PVC pipe. Secure by driving screws through the hinge and six-foot support.

To secure the gate, wrap a length of chain around the four-foot section of gate and support post opposite of the hinge side.