How to Fix a Bubble in a Roof Shingle

Update

Severe weather or heat exposure can damage roof shingles. Heat exposure can cause the shingle to buckle or form a bubble and in some cases, become torn or cracked and you usually cannot repair them but must replace them instead. In some instances, it's only a matter of pulling the shingle up, flatting it under bricks and then re-adhering it with tar and nails.

  • Place a ladder against the roof away from satellite dishes and suspended wires. Climb onto the roof and have someone hand you a claw hammer, pry bar, shingles, putty knife, heat gun, nails and a bucket of tar.

  • Insert a pry bar under the damaged shingle to scrape the tar from the roof under the shingle. Pull up the nails in the bubbled shingle with a claw hammer and then peel the shingle up. It is not uncommon for damaged shingles to tear when you dislodge them from the roof.

  • Scrape the roof where the shingle was located with a putty knife to get up any remaining tar. The space should be flat and free of any tar.

  • Warm the warped shingle with a heat gun until it's pliable. Have someone hand-up several bricks. Set it on the roof between two bricks to flatten it out. Leave for several hours or overnight. Cover the space where the shingle came up with a tarp. Place bricks on the tarp to keep it in place.

  • Take up the tarp and remove the flattened shingle from the bricks. Replace the flattened shingle by pouring a small amount of tar onto the bare roof and tack down with roofing nails and a hammer. If the shingle ripped when taking it up, simply replace it with a new one.

    • ncG1vNJzZmign6KytMDEmpuyZpOkunC0zrBkcWlnaYZyfoyfoLFlkqqvo7jEZqmop5ZiwKm1zaCjnmaYqbqt